里番全彩爆乳女教师,成人精品一二三区,正在播放酒店约少妇高潮

A new choice for heating in large space - hot water radiant panel heating

time：2024-03-26
hits：1065次
source：正弘奧能

Description of the hot water radiant panel in the Design Code for Heating, Ventilation and Air Conditioning of Civil Buildings: The ceiling hot water radiation panel is a kind of metal radiation panel, which can be used for comprehensive heating of buildings with a height of 3m~30m and local area or local workplace heating, and its use is very wide, including large shipyards, ships, aircraft and automobile maintenance halls, building materials markets, shopping centers, exhibition venues, multi-functional stadiums and entertainment halls and many other occasions.


	 


	<img src="http://www.job00531.cn/Uploads/image/20240326/20240326112408_36676.png" alt="" />

 
Increased ventilation has less effect on the performance of the hot water radiant panel than a convective system, because the radiation component is not affected by the ventilation rate, whereas a convective system must primarily raise the air temperature to maintain comfortable conditions. Examples include areas such as large lecture theatres and lecture halls, where doors may remain open during occupation, allowing large amounts of air to pass through the space. 
 
Shorter warm-up times are often associated with radiative systems because radiative heat transfer directly exchanges heat with the thermal mass of the building. Once the hot water radiant panel temperature is higher than the temperature of the room surface, the building structure will begin to absorb heat. The water content of the hot water radiant panel is lower than that of the traditional radiator system, so the heating uptime is reduced, the preheating time is short, and the thermal effect is fast, thus achieving more efficient intermittent use. The hot water radiant panel will have a downward-radiating component of about 60%, maintaining the soffit temperature and preventing cold water. 
 

	The hot water radiant panel system has no fire hazard and no combustible components. The most suitable solution for heating industrial buildings with wood processing. Radiant heating provides the necessary comfort without air or dust moving around, and responds almost immediately to temperature changes in the room, which can occur due to the switching of the system and the heat load associated with the operation itself in the room. There are many important practical applications in the wood and furniture industry, from sawmills to large processing plants to storage warehouses.


	 


	<img src="http://www.job00531.cn/Uploads/image/20240326/20240326112343_72712.png" alt="" />

 
ECOPAN hot water radiation panel promoted and sold by Beijing Leadway Power Co., Ltd. is made of metal tube plate, which is prefabricated into 3 meters and 6 meters (special requirements can be prefabricated into 2 meters and 4 meters) standard length. Each radiant panel can be connected with a quick connector. Each radiant panel and collection pipe is prefabricated in the factory and tested for safety. With the same dimensional characteristics (pipe diameter, number and spacing, panel width), ECOPAN hot water radiant panels have higher thermal energy efficiency than other products on the market. This makes it possible to use fewer products to meet the same heating requirements, saving on materials and installation costs. 
 
The hot water radiation plate adopts modular splicing, series type ribbon arrangement, and the two modules are directly connected by clamping joint, which is quick and easy to connect. After the pipe connection is complete, insert the decorative cover plate between the radiation plate to cover the connection area and ensure the beauty of the product. 
 
In the future, with the advancement of the industrialization process and the renewal of old equipment and the further elimination of regional boilers, the coverage rate of infrared radiation heating equipment is expected to be further improved. The infrared radiation heating method is suitable for comprehensive heating of buildings with a height of 4m~30m and local area or local working place heating. Whether it is a manufacturing enterprise, storage and logistics center or aircraft, railway maintenance warehouse, infrared radiation heating equipment can be perfectly applied. Therefore, the use of advanced infrared heating equipment, industrial enterprises not only achieve energy saving and emission reduction, but also create a comfortable working environment for employees, create more considerable economic benefits, to maximize economic benefits.

国产成人精品视频一区二区不卡_亚洲avav国产av综合av_国产盗摄XXXX视频XXXⅩ_放荡少妇深喉吞浓精_亚洲区色_伊人av影院

A new choice for heating in large space - hot water radiant panel heating